產品目錄
聯系我們
產品資料
  首頁 >>> 產品目錄 >>> 邊界掃描

邊介掃描JTAG/Boundary Scan(jtag邊界掃描測試)

如果您對該產品感興趣的話,可以
產品名稱: 邊介掃描JTAG/Boundary Scan(jtag邊界掃描測試)
產品型號:
產品展商: 其它品牌
產品文檔: 無相關文檔

簡單介紹

JTAG/Boundary Scan integration in In-Circuit-Test (ICT) systems In-Circuit-Test (ICT) is the most widespread technology at present because the principle allows all electrically detectable faults to be found. But its capability is becoming limited by access difficulties since components have become smaller, and because of more complex narrow width nets and multi-layer boards. Boundary Scan do


邊介掃描JTAG/Boundary Scan(jtag邊界掃描測試)  的詳細介紹

JTAG/Boundary Scan integration in In-Circuit-Test (ICT) systems

In-Circuit-Test (ICT) is the most widespread technology at present because the principle allows all electrically detectable faults to be found. But its capability is becoming limited by access difficulties since components have become smaller, and because of more complex narrow width nets and multi-layer boards.

Boundary Scan does not have access limitations. A combination is beneficial whenever mechanical access is difficult even though there may be a small number of Boundary Scan components on the PCB.

Advantages:

  • Very fast total system
  • Very high fault coverage also for highly compact PCBs
  • Reduction of nail bed adapter costs
  • Simple test program generation because each test technology is applied according to its core competence


  • Integration example for series PTI818S





  • PCBA邊界掃描測試JTAG




    Combination of PTI Tester PTI818Swith SCANFLEX Hardware:

    • Controller SFX/PCI1149
    • SFX-TAP4 for Pin Slot

    and Software:

    • CASCON GALAXY for PTI818S



    PTI818S - Utility Card Module CASCON GALAXY

    Die PTI818S is eine professionelle JTAG/Boundary-Scan-Option, welche speziell für die Utility Card von Agilent entwickelt wurde. Der auf der SCANBOOSTER?-Architektur basierende TAP-Controller hat zwei unabh?ngig voneinander programmierbare TAPs, zwei B?nke mit jeweils 4 PIPs und eine Selbsttestfunktionalit?t. Zwei PIP-Signale k?nnen als analoge Kan?le zum Treiben und Messen analoger Werte w?hrend der Testerstellung mit SYSTEM CASCON? benutzt werden.

    • Boundary Scan solution for Agilent’s Utility Card in Medalist ICT
    • Official proofed system integration by Agilent and GOEPEL?electronic
    • Easy to mount and full documented SYSTEM CASCON? quick installation
    • Extended self test feature for simple system check
    • SCANBOOSTER? architecture controlled by USB 2.0 high speed
    • Two test access ports (TAP), eight parallel interface ports (PIP) and two analogue channels
    • On-board power management to use Agilent’s power supply

產品留言
標題
聯系人
聯系電話
內容
驗證碼
點擊換一張
注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!

粵公網安備 44030602001522號

仙剑